Skip to content
Experiments

Placeholder content: example data for the site scaffold, not real measurements

EXP 001 · Experimental joinery · 2026-06-01 · Open · CC BY 4.0

Impossible dovetail

Placeholder experiment: a dovetail that looks impossible to assemble, loaded to failure and compared with a standard through dovetail of the same size.

Tests Impossible dovetail

1 · Question

Does the impossible dovetail hold as much load as a standard through dovetail of the same size?

2 · Method

  1. 01 Cut five impossible dovetails and five through dovetails in ash, 20 × 60 mm cross-section.
  2. 02 Condition all specimens at 20 °C and 65 % relative humidity for two weeks.
  3. 03 Load each joint in tension at 2 mm/min until failure and record the maximum load.

3 · Result

Result · EXP 001

Does the impossible dovetail hold as much load as a standard through dovetail of the same size?

4.2kN

Mean failure load, impossible dovetail (n = 5)

Placeholder values: about 86 % of the through dovetail (4.9 kN), so the hidden geometry costs some strength.

4 · Data

FileDownload
Pull-out test pull-out-test.csv Download

Licence

Released under CC BY 4.0. Credit as:

"Impossible dovetail" (EXP 001) by Dr Bugholz, https://drbugholz.com/experiments/impossible-dovetail/, CC BY 4.0

More on crediting

Support

Funded by patrons, open to everyone

Patrons fund the experiments behind the furniture and get early access to each one for 90 days, plus the plans, drawings and guides first and a say in what gets tested next. After that, the video, results and data are released under CC BY 4.0, and the plans under CC BY-NC 4.0.

Patron page coming soon Patron tiers